8GB Sandisk MicroSDHC Memory Card with SD Adapter

#ad
SanDisk FBA_SDSDQ-8192-E11M #ad - High-storage capacity for storing essential digital content such as high-quality photos videos music and more optimal speed and performance for Microsoft patible devices speed performance rating: class 2easily transfer files between your digital devices and puter5 Year limited warranty High storage capacity 8GB for storing essential digital content such as high quality photos, videos, music and more.

Seamless speed and ‚‚performance with microSDHC compatible devices. High quality microSDHC card backed by 5 year limited warranty. Speed performance rating: Class 4 based on SD 2. 00 specification.

#ad



Adafruit Assembled Data Logging Shield for Arduino

#ad
ADAFRUIT INDUSTRIES 100532 #ad - Adafruit worked hard to engineer an inexpensive but well-rounded design. Adk/mega r2 or lower are not supported. Requires soldering of header pins. Not only is it easy to assemble and customize, it also comes with great documentation and libraries. You can get going quickly - saving data to files on any FAT16 or FAT32 formatted SD card, to be read by any plotting, spreadsheet or analysis program.

. You'll need some basic soldering skills to put it together, but even if you don't have much experience you can get it done in under 15 minutes. The board will still operate without the coin cell battery. Data logging shield for ArduinoHere is a useful Arduino shield. Once installed the RTC battery will last for years.

Adafruit Assembled Data Logging Shield for Arduino #ad - Adafruit libraries and example code for both SD and RTC mean you can get going quickly. Prototyping area for soldering connectors, circuitry or sensors. Note: the rtc requires a small coin cell battery not included. Works with arduino uno, duemilanove, diecimila, Leonardo or ADK/Mega R3 or higher. The included real time clock timestamps all your data with the current time, so that you know precisely what happened when! Please note that this item does not come with an Arduino you'll need one to use with the shield, SD card or coin cell battery! The shield comes with all the components soldered on and tested but does not have headers installed.

Many people have been looking for a dedicated and well-designed data logging shield.

#ad



Gonioa 10 Pcs 9v Battery Clip, 9V Battery Power Cable Plug Clip 2.1 X 5.5mm Male DC Plug for Arduino

#ad
Gonioa #ad - The board will still operate without the coin cell battery. Package included: 10*Battery Clip. Works with arduino uno, duemilanove, diecimila, Leonardo or ADK/Mega R3 or higher. New brand high quanlity. Size: 18. 5cm. Material: plastic Color: Black Size: 18. 5cm weight: 80 g package included: 10*Battery Clip Plug Type: 2.

1 x 5. 5mm male to 9v battery clip On board real time clock rtc keeps the time going even when the arduino is unplugged. Note: the rtc requires a small coin cell battery not included. Once installed the RTC battery will last for years. Adafruit libraries and example code for both SD and RTC mean you can get going quickly.

Gonioa 10 Pcs 9v Battery Clip, 9V Battery Power Cable Plug Clip 2.1 X 5.5mm Male DC Plug for Arduino #ad - Prototyping area for soldering connectors, circuitry or sensors. Adk/mega r2 or lower are not supported. Requires soldering of header pins. Plug type: 2. 1 x 5. 5mm male to 9V Battery Clip. Material: Plastic.

#ad



USB Data Sync Cable for Arduino UNO / Arduino Mega 2560 Rev 3 R3 Microcontroller

#ad
Directsrc #ad - Adk/mega r2 or lower are not supported. Requires soldering of header pins. Usb cable to connect an Arduino microcontroller to a PC or Mac. Prototyping area for soldering connectors, circuitry or sensors. Cable is 3ft plug to plug in length. Plug type: 2. 1 x 5. 5mm male to 9V Battery Clip. Usb cable to connect an arduino microcontroller to a PC or Mac On board real time clock rtc keeps the time going even when the arduino is unplugged.

Compatibility tested with genuine arduino uno a000066 / Arduino Mega 2560 A000067 Rev 3 R3 Microcontroller Models. New brand high quanlity. Once installed the RTC battery will last for years. Adafruit libraries and example code for both SD and RTC mean you can get going quickly. Works with arduino uno, duemilanove, diecimila, Leonardo or ADK/Mega R3 or higher.

USB Data Sync Cable for Arduino UNO / Arduino Mega 2560 Rev 3 R3 Microcontroller #ad - Package included: 10*Battery Clip. Cable is also compatible with generic ATmega328P and ATmega2560 design based boards. The board will still operate without the coin cell battery. Size: 18. 5cm.

#ad



KOOKYE 5PCS Temperature Sensors TMP36 Precision Linear Analog Output for Arduino Raspberry Pi

#ad
KOOKYE TMP36 #ad - Adk/mega r2 or lower are not supported. Requires soldering of header pins. The tutorial link : www. Kookye. Com/?p=160 specification: Voltage Input: 2. 7v to 5. 5v dc output range: 01v -40°c to 2. 0v 150°c temperature range: -40°c to 150°c / -40f to 302f 2°C accuracy On board real time clock rtc keeps the time going even when the arduino is unplugged.

Material: Plastic. The perfect size to allow mobility while connected to your Arduino device. Cable is also compatible with generic ATmega328P and ATmega2560 design based boards. Voltage input: 2. 7v to 5. 5v dc, output range: 01v -40°c to 2. 0v 150°c. New brand high quanlity. Note: the rtc requires a small coin cell battery not included.

KOOKYE 5PCS Temperature Sensors TMP36 Precision Linear Analog Output for Arduino Raspberry Pi #ad - Prototyping area for soldering connectors, circuitry or sensors. Please visit our office website to learn tutorial for temperature sensor :www. Kookye. Com/?p=160

#ad



SanDisk® microSDHCTM 8GB Memory Card

#ad
SanDisk FBA_8GB #ad - Material: Plastic. Cable is 3ft plug to plug in length. Works with arduino uno, duemilanove, diecimila, Leonardo or ADK/Mega R3 or higher. Plug type: 2. 1 x 5. 5mm male to 9V Battery Clip. Temperature range: -40°c to 150°c / -40F to 302F 2°C accuracy. Note: the rtc requires a small coin cell battery not included.

Voltage input: 2. 7v to 5. 5v dc, output range: 01v -40°c to 2. 0v 150°c. Compatible with most devices with a microSD / microSDHC card slot. Fast transfer rate. Reliable data copying, download, and backup. Rugged construction; Resists damage due to water, temperature, X-rays and shock. Package included: 10*Battery Clip.

SanDisk® microSDHCTM 8GB Memory Card #ad - Usb cable to connect an Arduino microcontroller to a PC or Mac. The board will still operate without the coin cell battery. Please visit our office website to learn tutorial for temperature sensor :www. Kookye. Com/?p=160

#ad



SunFounder Raspberry Pi RAB Holder Breadboard Kit with 830 Points solderless Circuit Board Raspberry Pi Holder for Arduino R3, Mega 2560 & Raspberry Pi 3B+, 3 Model B, 2 Model B and 1 Model B+

#ad
SunFounder #ad - Please visit our office website to learn tutorial for temperature sensor :www. Kookye. Com/?p=160 Prototyping area for soldering connectors, circuitry or sensors. Outputs an analog voltage that is proportional to the ambient temperature. Package included: 10*Battery Clip. Specifications size: 200 x 135 mm 7. 87 x 5.

31 inch package included 1 x rab holder 1 x 830-point breadboard 65 x jumper wire1 x 20cm fc40 40pin flat rainbow ribbon cable10 x 1kΩ resistor1 x screwdriver1 x T-Extension 9 x LED 3 red, 4 x PWM2*6 screw, and 3 green 12 x Screws4 x M3*6 screws, 3 yellow, 4 x PWM2*4 screws On board real time clock rtc keeps the time going even when the arduino is unplugged.

SunFounder Raspberry Pi RAB Holder Breadboard Kit with 830 Points solderless Circuit Board Raspberry Pi Holder for Arduino R3, Mega 2560 & Raspberry Pi 3B+, 3 Model B, 2 Model B and 1 Model B+ #ad - What's more, it also comes with 65pcs jumper wires with different length in various colors, you can just plug them into the control board and breadboard to build circuits, therefore, no bothering about complicated soldering. Size: 18. 5cm. Cable is also compatible with generic ATmega328P and ATmega2560 design based boards.

Cable is 3ft plug to plug in length. With this kit, raspberry pi, you can fix your Arduino board, and breadboard on the RAB Holder, free of careless short circuits on a metal desk or caused by some metal parts underneath. The board will still operate without the coin cell battery. Voltage input: 2.

#ad



eBoot 30 Pieces Photoresistor Photo Light Sensitive Resistor Light Dependent Resistor 5 mm GM5539 5539

#ad
eBoot #ad - Eboot 30 pieces photoresistor photo light sensitive resistor light dependent resistor 5 mm gm5539 5539 description: product name: photo light sensitive resistor Maximum voltage: 150 Volt DC Spectral peak: 540 nm Maximum wattage: 100 mW Light resistance 10 Lux: 50-100 Kohm Operating temperature: - 30 ~ + 70 degree Celsius Enough photo light sensitive resistors are handy for your DIY and hand working projects.

Package included: 10*Battery Clip. Adk/mega r2 or lower are not supported. Requires soldering of header pins. Voltage input: 2. 7v to 5. 5v dc, output range: 01v -40°c to 2. 0v 150°c. 5pcs tmp36 temperature sensors, High accuracy solid state temperature sensor. The perfect size to allow mobility while connected to your Arduino device.

eBoot 30 Pieces Photoresistor Photo Light Sensitive Resistor Light Dependent Resistor 5 mm GM5539 5539 #ad - Works with arduino uno, duemilanove, diecimila, Leonardo or ADK/Mega R3 or higher. Once installed the RTC battery will last for years. Adafruit libraries and example code for both SD and RTC mean you can get going quickly. Maximum voltage: 150 Volt DC.

#ad



【5-Year Warranty】 CELEWELL CR1220 3V Lithium Battery 40mAh for Fairy Pearls/LED Light/Bracelet/Flashlight/Clock 5-Pack

#ad
CELEWELL CR1220 Battery 5 #ad - Celewell is the leading manufacturer of batteries which was started by a mother named Stella. Size: 18. 5cm. Works with arduino uno, duemilanove, diecimila, Leonardo or ADK/Mega R3 or higher. Celewell is a new brand on amazon like Stellas baby who needs our team take care of her with much effort so as to perform better and better.

Adk/mega r2 or lower are not supported. Requires soldering of header pins. Please visit our office website to learn tutorial for temperature sensor :www. Kookye. Com/?p=160 High capacity, however, more durable - with best material and preciser technology. Prototyping area for soldering connectors, circuitry or sensors.

【5-Year Warranty】 CELEWELL CR1220 3V Lithium Battery 40mAh for Fairy Pearls/LED Light/Bracelet/Flashlight/Clock 5-Pack #ad - Compatible with most devices with a microSD / microSDHC card slot. Fast transfer rate. Reliable data copying, download, and backup. Rugged construction; Resists damage due to water, temperature, X-rays and shock. The sunfounder breadboard kit fits perfectly for a raspberry Pi 3B+, 2 Model B and 1 Model B+, 3 Model B, an Arduino R3 or Mega 2560.

The high quality rab holder makes everything convenient and neat. Enlarge the fun when you fix the Raspberry Pi and Arduino boards.

#ad



Sandisk 4GB MicroSDHC Memory Card with SD Adapter

#ad
SanDisk FBA_SDSDQ-4096-A11 #ad - Please note and read description - Bulk Card -- Not retail packaging. New brand high quanlity. Once installed the RTC battery will last for years. Adafruit libraries and example code for both SD and RTC mean you can get going quickly. Celewell develops high and real capacity 50mAh for CR1616 batteries. All of cards of celewell's batteries are marked capacity, there is no capacity or with fake capacity on the cards of some ordinary brand batteries.

Premium performance, much better than those ordinary batteries with 1-2 years shelf life on the market. Voltage input: 2. 7v to 5. 5v dc, output range: 01v -40°c to 2. 0v 150°c. Light resistance 10 lux: 50-100 kohm; Operating temperature: - 30 ~ + 70 degree Celsius. Outputs an analog voltage that is proportional to the ambient temperature.

Sandisk 4GB MicroSDHC Memory Card with SD Adapter #ad - High storage capacity 4GB for storing essential digital content such as high quality photos and video. Optimal speed and performance for MicroSDHC compatible devices. Plug type: 2. 1 x 5.

#ad



ARDUINO UNO R3 A000066

#ad
ARDUINO A000066 #ad - Microcontroller microchip atmega328poperating voltage 5vusb standard type bdigital i/o pins 14pwm digital i/o Pins 6Analog Input Pins 6Flash Memory 32 KBSRAM 2 KBEEPROM 1 KBClock Speed 16 MHz On board real time clock rtc keeps the time going even when the arduino is unplugged. Material: Plastic. Works with arduino uno, diecimila, duemilanove, Leonardo or ADK/Mega R3 or higher.

. Temperature range: -40°c to 150°c / -40F to 302F 2°C accuracy. Compatibility tested with genuine arduino uno a000066 / Arduino Mega 2560 A000067 Rev 3 R3 Microcontroller Models. Uno" means one in italian and was chosen to mark the release of Arduino Software IDE 1. 0, now evolved to newer releases. Compatible with most devices with a microSD / microSDHC card slot.

ARDUINO UNO R3 A000066 #ad - Fast transfer rate. Reliable data copying, download, and backup. Rugged construction; Resists damage due to water, temperature, X-rays and shock. The sunfounder breadboard kit fits perfectly for a raspberry Pi 3B+, 2 Model B and 1 Model B+, 3 Model B, an Arduino R3 or Mega 2560. The high quality rab holder makes everything convenient and neat.

Enlarge the fun when you fix the Raspberry Pi and Arduino boards.

#ad