As an Amazon Associate I earn from qualifying purchases.


Your stv-90 is sure to last longer than any other duct clamp out there! This means your clothes get dryer faster and you save money on your power bill! Avoid the headache: the stv-90 lets you to push your dryer up against your wall without kinking or crushing the hose and losing airflow.
Does the trick: the snap-to-vent simple design gives you the power to hook up your dryer in just a matter of a few minutes. No more fiddling around with rigid metal dryer clamps! Saves you money: our silicon seal ring gives you an airtight dryer connection, making your dryer more efficient while using less energy. Simply slide it on and push your dryer back.


We rely on quality to sell our products. This complete kit installs easily and works efficiently. The snap connector has also been updated to make it even easier to install and use. All of our products are made in the USA with top-quality materials.
We added 5-degrees of draft to make sure it fits all 4" vent ducting. These products are the best choice for simplicity and durability. Updated hose connection - due to customer feedback, ziggurat is excited to say that we have enlarged the 90-degree elbow and the straight diameter duct connection. Ziggurat’s dryer hose connector kit is made to be easily cleaned out and is made of quality materials to prevent crushing, ripping or other damage to the connection.

1. Dryerbox
#ad
Venting up, Dryerbox Model 350 DB-350 | New Construction 2x4 Walls
#adDryerbox #ad - Up or down venting Direction? Review the images to assist with your selection. 22 ga. Feet of living area by moving both appliances back 5 inches without crushing the hose. Existing or new construction? Please read the full description below to assist with your selection.More information #ad
Yields 2 sq. Metal deep drawn recessed dryer vent box with gas port knock-out and Pipe support tab. Efficiency is increased, fire hazard is lessened, and clothes take less time to dry.Brand | Dryerbox #ad |
Manufacturer | In-O-Vate Technologies #ad |
Height | 21 Inches |
Length | 3.5 Inches |
Weight | 4.03 Pounds |
Width | 12 Inches |
Part Number | DB-350 |
Model | DB-350 |
More information #ad
2. Builder's Best
#ad
Builder's Best BDB110050 Semi-Rigid Dryer Vent Kit with Close Elbow, Silver
#adBuilder's Best #ad - Meets clothes Dryer Manufacturer Specifications. Close elbow makes A 90deg Turn In 4". 4" x 8ft 100% aluminum v430 Readi-pipe Duct.More information #ad
Brand | Builder's Best #ad |
Manufacturer | Builders Best #ad |
Height | 23 Inches |
Length | 10.25 Inches |
Weight | 2.3 Pounds |
Width | 5.25 Inches |
Part Number | 110050 |
Model | BDB110050 |
More information #ad
3. ZIGGURAT PRODUCTS
#ad
By Ziggurat Products, DIY Easy Dryer Vent Hookup Kit, STV-90 Dryer Duct Connector
#adZIGGURAT PRODUCTS #ad - Works with your hose: we’ve updated our design to fit any 4” vent ducting, whether beveled or straight. You don’t need to go searching for the right sized clamp anymore--we’ve got you covered! Effortless and durable: our sturdy elbow connector makes set up simple and a one-time project.Your stv-90 is sure to last longer than any other duct clamp out there! This means your clothes get dryer faster and you save money on your power bill! Avoid the headache: the stv-90 lets you to push your dryer up against your wall without kinking or crushing the hose and losing airflow.
More information #ad
Does the trick: the snap-to-vent simple design gives you the power to hook up your dryer in just a matter of a few minutes. No more fiddling around with rigid metal dryer clamps! Saves you money: our silicon seal ring gives you an airtight dryer connection, making your dryer more efficient while using less energy. Simply slide it on and push your dryer back.
Brand | ZIGGURAT PRODUCTS #ad |
Manufacturer | Design-Tek #ad |
Height | 5.5 Inches |
Length | 6.25 Inches |
Weight | 0.5 Pounds |
Width | 4.5 Inches |
Part Number | STV-90 |
Model | STV-90 |
More information #ad
4. Deflect-O
#ad
DRYER VENTING BOX 4" WHT
#adDeflect-O #ad - Galvanized adapter ensures metal-to-metal connession. Helps avoiding cruching of duct. Color: White. Hose diameter: 4". Recessed.More information #ad
Brand | Deflect-O #ad |
Manufacturer | Deflect-O #ad |
Height | 12 Inches |
Length | 12 Inches |
Width | 5 Inches |
Part Number | DVBOXKIT |
Model | DVBOXKIT |
More information #ad
5. ZIGGURAT PRODUCTS
#ad
DIY Easy Dryer Vent Hookup Kit, by Ziggurat Products, STV-M Dryer Duct Connector
#adZIGGURAT PRODUCTS #ad - Our safe alternatives to dryer duct connectors were designed to improve household safety. Tight duct attachment– this plastic dryer hose kit is made of soft rubber that will snugly attach to the hose on your clothes dryer. We create household accessories that make life easier for our valued customers.We rely on quality to sell our products. This complete kit installs easily and works efficiently. The snap connector has also been updated to make it even easier to install and use. All of our products are made in the USA with top-quality materials.
More information #ad
Products made in the usa – the ziggurat products were envisioned by a father and son who cared about safety and value. Our dryer connectors resolve the risk of potential fires, help create a better operating dryer, and don’t need to be attached with a clamp. Durable vent tube kit - our stv-m snap-to-vent kit is designed to last for years. We added 5-degrees of draft to make sure it fits all 4" vent ducting. These products are the best choice for simplicity and durability. Updated hose connection - due to customer feedback, ziggurat is excited to say that we have enlarged the 90-degree elbow and the straight diameter duct connection. Ziggurat’s dryer hose connector kit is made to be easily cleaned out and is made of quality materials to prevent crushing, ripping or other damage to the connection.
Brand | ZIGGURAT PRODUCTS #ad |
Manufacturer | ZIGGURAT #ad |
Height | 5 Inches |
Length | 8 Inches |
Weight | 1 Pounds |
Width | 4 Inches |
Part Number | STV-M |
Model | STV-M |
More information #ad
6. Value not found
#ad
10' x 10' x 4', EZ Dryer Vent 036663559746 Dryer Vent System, White
#adValue not found #ad - Heavy duty Magnetic boot for easy disconnecting. Made from galvanized steel with enamel coat - will not rust. Improves air flow and dryer time, saving you money. Reduces the fire hazard of clogged ducting with quick access for cleaning.More information #ad
Easy to install - no more crimping your dryer duct. Exhaust vent can be installed left, right, up or down. Easy to move your dryer, connect and disconnect is a snap.Brand | Value not found #ad |
Manufacturer | EZ Pet Barrier #ad |
Height | 4 Inches |
Length | 10 Inches |
Weight | 3 Pounds |
Width | 10 Inches |
Part Number | 036663559746 |
Model | 036663559746 |
Warranty | 1 year |
More information #ad